ProForm Flowable Polyester Finishing Putty (SKU: PRF 11288)
Description:
ProForm Flowable Polyester Finishing Putty is a premium, flowable glazing putty designed to address pinholes, sanding scratches, and minor surface imperfections. Unlike traditional glazing putties, it can be applied over larger areas while maintaining the original panel contour.
Key Features:
-
Flowable formula: Ideal for smoothing large areas without buildup
-
Ultra-thin application: Can be feathered to a razor-thin edge
-
Excellent for final finishing: Fills micro imperfections before priming
-
Improves body filler performance when mixed
-
Cream hardener included for proper curing
-
Sands easily to a fine, smooth surface
Suitable Substrates:
-
Sanded OEM finishes
-
Bare steel
-
Galvanized steel
-
Over cured or sanded body filler
-
Aluminum (check compatibility in TDS)
Typical Applications:
-
Final surface preparation before primer or paint
-
Filling:
-
Pinholes
-
Sanding scratches
-
Swirl marks
-
Micro low spots
-
-
Blending edges of repaired areas
General Instructions for Use:
-
Prep Surface: Sand and clean thoroughly (usually 180–220 grit for adhesion)
-
Mix with Hardener: Add cream hardener (approx. 2% by volume) and mix until uniform color
-
Apply Thinly: Spread with a spreader or squeegee in thin layers
-
Dry Time: Let cure (usually 15–20 minutes at 70°F)
-
Sand: Sand to desired smoothness (typically starting at 180–220 grit, finishing with 320–400)
⚠️ Best Practices:
-
Do not apply over unsanded or contaminated surfaces
-
Use in well-ventilated areas with proper PPE
-
Apply in thin coats to avoid shrinkage or cracking
-
Always refer to TDS/SDS for exact mixing ratios, cure times, and safety precautions